Just finished building this bino chair. Can’t wait for some clear skies to put it to use.
7 Likes
looks nice!
This is awesome! How much did it cost you? Is it ona swivel base?
1 Like
It was just over $200. I already had the chair and bino adapter. It does swivel. I bought a whole sheet of plywood but only needed 2ft x 4ft. Here is the cost breakdown:
| Description | Cost |
|---|---|
| 3/4 in plywood 8ft x 4 ft | 35.88 |
| Lazy Suzan hardware | 21.79 |
| 1-1/2 in x 10 ft PVC (2) | 25.56 |
| 1 in x 10 ft PVC | 8.48 |
| 1-1/2 in PVC elbows (4) | 11.4 |
| 1 in PVC elbows (2) | 2.96 |
| 1-1/4 in x 10 ft steel conduit | 31.35 |
| 1-1/2 in to 1-1/4 in flex coupling (4) | 34.04 |
| 1-1/2 in flex coupling (2) | 10.42 |
| 1-1/2 in pipe strap (2) | 1.56 |
| 1 in pipe strap (2) | 1.56 |
| 3/8 in x 4in hex bolt (2) | 7.6 |
| 3/8 in flat washers (6) | 2.04 |
| 3/8 in hex nuts (2) | 1.22 |
| 1/4 in wire pin locks (2) | 5.94 |
| 1/4 in x 2-1/2 hex bolt | 1.29 |
| 1/4 in flat washers (3) | 1.2 |
| 1/4 in hex nut | 0.35 |
| 8 x 3/4 in wood screws pkg | 2.48 |
| TOTAL | 207.12 |
2 Likes